This short video will show you how to connect to the Roco ®WLAN multimaus through the internal DR5000 Wi-Fi.
Step 1: Connect your laptop/phone to the internal DR5000 Wi-Fi
Step 2: Open the LAN settings on the DR5000 software
Step 3: Change the DR5000 protocol to Z21
WLAN multimaus setttings
Step 1: Power on the WLAN multimaus
Step 2: Select the arrow button (bottom left) and the menu button to go to the menu. Navigate to the Settings menu with the top arrow buttons.
Step 3: Select the Wi-Fi menu, press OK when you see SSID, press OK when you see search. The search will now start.
Step 4: Select the DR5000-Serial SSID, enter the default password, and press OK.
Step 5: Select the Z21 IP option and change the ip to 192.168.16.254 and press OK.
Please note if you are not using the internal DR5000 Wi-Fi, the procedure is the same, but you need to use the IP address that is shown on the main screen of the DR5000 software.
If you have any questions or need any help, please create a support ticket.