Please note that the DK50018 has build in short circuit protection to protect its outputs and connected devices when there is a short circuit. When this happens the red LED will burn until the short circuit is resolved.  Please note that  this  protection is not  an overload   protection.  Solenoid point motors like the Peco Pl-10, PL11, PL-1000 and  Seep  PM-1, PM-2 should not be directly connected to the DK50018 as they draw too much current and this will damage the DK50018 and most likely your Point Motors. You can still have all the benefits of the DK50018 and the Digikeijs app by adding a simple add-on in between your point motor and the DK50018. We will give more information on this very soon through our normal communication channels.